Commercial locksmith · Concord, PA

Panic Bar Installation in Concord, PA

Panic Bar Installation for shops, offices and buildings in Concord. Call and we tell you honestly when we can be there.

  • 3 years in business
  • Open 6 days a week
  • Cars, homes and businesses
Push bar exit device on a commercial rear door

Panic Bar Installation for Concord businesses

A rear delivery entrance in Concord can create two different needs: keeping outside access limited and giving people inside a straightforward way out.

We install panic bars on business doors so a push from inside releases the door, even when entry from outside is locked. If you want employees to enter from outside, a keyed exterior handle is one choice. An exit only setup is another, with no outside handle for entry. The choice rests on how you use the entrance and who needs a key.

For a pair of doors at a Concord business, each side needs consideration. We install exit devices to suit the opening, including the side people use for entry and whether both sides need to open with a push. An exit that sticks or drags presents a separate problem: it may not close and latch properly, and a push bar alone will not correct the movement. The condition of the opening matters when choosing equipment for it.

What to have ready

When you call, we will ask whether you have one door or a pair, what it is made of, and whether it swings outward.

For a pair, tell us which side you use and whether both sides need to open. These details help us understand the opening and which panic bar arrangement may fit. If the door sticks, drags, or is hard to close, mention that too, since it may affect how the exit device engages.

Have the approximate width and a few photos of both sides ready if you have them. We will also ask what hardware is in place and whether you want the entrance locked from outside, with a keyed handle, or without outside access. A photo of the existing lock and any key you use can help us understand what is there and what changes you have in mind.

The work at your business door

We first look at the worn exit device and the door it serves, including how the door closes and whether it sticks or drags.

On a pair of doors, we check how the two leaves meet and where push hardware is needed. Wear at the latch or poor alignment can affect how a replacement works, so we look for those problems rather than assuming the old hardware is the only issue. If the opening needs work outside the installation, we explain what we found and what needs attention.

Before starting, we explain the replacement choices and how they affect access from outside. You may want the exterior kept locked, or a keyed handle that allows entry while people inside can push to exit. The existing setup and the way you use the opening guide those choices. After installation, we test the push action, closing and latching with you, and check the outside handle if one is installed. You can try the opening yourself and point out anything that catches or feels difficult to operate.

  1. You callWhich doors, who uses them.
  2. A few questionsHours and who holds keys.
  3. The plan, firstHardware and keys explained.
  4. Tested with youEach door we worked on.

Panic Bar Installation near you in Concord

Imagine a business entrance near the Ivy Mills Historic District in Concord.

You want the door locked from outside, with an exit that opens by pushing from the interior. A panic bar provides that way out while the exterior remains locked. If you also need to enter from outside, a handle operated by a key gives you that option without making the interior exit depend on a key.

If the entrance has two leaves, the choice of outside access applies to each one separately. A keyed handle on one leaf does not automatically give you keyed entry through the other. The two sides also need to close properly where they meet. Outside access on one side may be enough, or you may want keyed access on both, if the doors and hardware allow it.

What to watch for afterward

At a rear door used for deliveries, keep boxes, carts and other supplies clear of the exit path.

Avoid wedging the door open or placing anything against the push bar. Test the release from inside when you can do so safely, and check that the door closes and latches after use. If you use a key for entry, make sure you have it with you before testing the outside handle.

Watch for dragging, sticking, a loose bar or a door that does not latch. Trouble turning the key is worth noting, too. Call us again if any of these problems appear, or if the door takes more effort to open than it did after installation. Avoid forcing it or taking the hardware apart. A dragging door may need attention beyond the exit device itself, so tell us what you notice when it moves.

Common questions about panic bar installation

Can people enter my business from outside with a key while the inside stays easy to exit?

Yes, an outside handle can accept a key while people inside push to exit. When the exterior is locked, the inside release still allows people to leave. You can also choose hardware that lets you keep the exterior unlocked when you want open access, so the choice affects how visitors enter.

On my double entrance, can I keep one side secured and still use the other to leave?

Yes, one side can remain secured while the other serves as the usual exit, if the entrance is suited to that arrangement. The secured side may need a release of its own when you need the full opening. How the two sides meet and which one opens first affect the hardware choice.

Will a new panic bar fix my exit door if the bottom drags on the floor?

No, a new device will not fix the drag. It releases the latch, but it cannot lift a dragging panel or correct a problem with the opening. If the panel catches, pushing may still be difficult with new hardware. The source of the drag needs separate attention so you can judge whether installation alone fits your situation.

Talk to a locksmith

We take calls Sunday to Thursday from 7 AM to 10 PM and Friday from 7 AM to 4 PM.

Call (484) 488-7719
(484) 488-7719