Deadbolt Installation in East Goshen, PA

If your back door feels weak, take a look at what keeps it locked.

A knob alone gives you one lock at the entry. We install a deadbolt to give you a separate way to secure the door. In East Goshen, we set the strike so the bolt lines up with its opening and extends fully into the frame. If it cannot extend all the way, the lock may not hold as intended.

You have two main choices for the new lock. Choose a single cylinder if you want a thumb turn indoors, with key access from outside. A double cylinder uses a key on both faces, which can limit someone's ability to reach through nearby glass and unlock the door. The key must also be available when you want to leave. If you want the new lock to match your other keys, we can check whether the locks are compatible before setting it up that way. That gives you a practical choice for your East Goshen home.

We start by looking at your entry door, the existing knob and the frame, including the space available for a deadbolt.

If a glass panel sits near the lock, we explain the choice between a single cylinder, operated with a key outside and a thumbturn inside, and a double cylinder, which also requires a key on the inside. The latter makes it harder to reach through broken glass and turn the lock, but needing a key indoors can delay an exit in an emergency.

We also check whether the new hardware is compatible with your other locks if you want them to use matching keys. We explain where the new opening and strike would go and what that placement means for how the door closes. Once you choose the hardware, we install it and set the strike so the bolt can extend fully into the frame without rubbing or stopping short. We check its operation with you, opening and closing the door and working the deadbolt from both sides.

A glass panel near your deadbolt is worth keeping in mind when you decide where to keep keys.

If the lock takes a key on both sides, keep the inside key accessible for an emergency, but out of reach through the glass. Avoid leaving it in the lock, where it may be reachable through a damaged pane. A single cylinder model opens from the inside with a thumb turn, so there is no inside key to manage.

Check that the deadbolt turns smoothly with the door closed and fully extends into the frame. If you have to pull or lift the door to lock it, or the bolt catches or stops short, call us to check the alignment. Don't force it. For routine care, wipe the hardware with a soft cloth and use a lubricant labeled for locks if the key begins to feel stiff. Avoid household oils, which can collect dirt.