Commercial locksmith · Media, PA

Panic Bar Installation in Media, PA

Panic Bar Installation in Media, planned around how your business uses its doors. One call gets you a plain answer about when we can be there.

  • 3 years in business
  • Open 6 days a week
  • Cars, homes and businesses
Push bar exit device on a commercial rear door

When you need panic bar installation in Media

A worn exit device on your business door may stick, feel loose, or fail to release when you push.

In Media, we replace worn hardware with a panic bar suited to the opening, so people can get out by pushing from inside. Dragging or catching at the bottom may point to a problem beyond the device itself. Avoid forcing the door, and keep the exit path clear while you arrange to have the problem addressed.

You can keep an exit locked from outside while allowing it to open from inside. An outside handle with a key is another choice if you need keyed entry as well. For a pair of doors, the arrangement matters: the hardware needs to suit how the two sides meet and how people use the exit. We look at the opening and explain the available choices for your Media business, including what each setup means for entry and exit.

Before we head your way

When you call about a panic bar, we ask whether the opening has one door or a pair, and which side you push to leave.

That tells us how many devices may be needed and where they would sit. Tell us what the door is made of, such as metal, wood or glass, and whether anything is already mounted across it. A photo of each side and a view of the full opening show us how much space is available.

We also ask how you want the outside to work. You may want it kept locked from outside, or you may need an exterior handle operated by a key. Tell us what lock is there now and whether anyone needs to enter without a key. Mention if either panel sticks, drags or is hard to close, since that affects how the exit hardware will operate. If you have a photo of the existing hardware, keep it handy so we can see what is already in place.

How the job goes on site

When we visit, we start by looking at the worn exit device, the condition of the door, and how it closes against the frame.

We check whether it sticks or drags, since a new bar alone may not solve that problem. We also look at the existing mounting points and the width and swing of the opening. Before work starts, we explain what fits, whether the existing setup needs other attention, and what replacing it will involve. If the opening needs work beyond the hardware, we explain what we found before proceeding.

When choosing a replacement, you may want the outside to stay locked while people can still push to exit. An exterior handle operated by a key is another option, if the setup supports it. For a pair of doors, we look at how the two sides work together and explain the hardware choices for each side. After installation, we check that the bar releases with a push and that the opening closes and latches. We also check the exterior access you chose and show you how it works, so you can try it with us.

  1. You callWhich doors, who uses them.
  2. A few questionsHours and who holds keys.
  3. The plan, firstHardware and keys explained.
  4. Tested with youEach door we worked on.

Local to Media

At a shop near Baltimore Avenue in Media, you might push an exit door and feel it catch before it opens.

If it will not open, use another available exit and keep the path to that exit clear. A sticking door is a separate concern from the device itself: installing a push bar does not by itself correct a door that drags against its frame. The door needs to move freely for the exit hardware to work as intended.

An outside handle with a key is one option if you need to control entry from the street. The outside can remain locked while the door opens with a push from the interior. We consider the door and how you need to use it when selecting an outside handle arrangement.

Looking after it

Keep the area on both sides of your rear delivery door clear of boxes, carts and other supplies.

After deliveries, make sure the door closes and latches. Wipe the push bar with a soft cloth, and avoid spraying lubricant or cleaner into the mechanism. Test the door from inside to make sure it opens with a push and closes fully behind you.

Watch for scraping, dragging or a door that needs an extra shove to latch. If you have an outside handle with a key, check that it works as intended without interfering with the exit from inside. On a pair of doors, check that both leaves close and latch properly. Call us if either door sticks, the hardware feels loose or the door will not open with a push. Do not rely on a door that fails that test as an exit.

Panic Bar Installation questions from Media

Can I lock the outside handle with a key while people inside still push their way out?

Yes, an outside handle can be keyed while the inside push device remains usable for exit. A key controls entry from outside without making one necessary to leave. Some setups also offer an unlocked entry setting, so people can enter without a key. The available settings vary with the hardware you choose.

Do I need two push devices on my pair of doors, or just one?

If you want both panels to open independently with a push, each needs its own device. If only one panel is intended to open for exit, a single device may suit that arrangement. The choice also affects how much opening space is available and whether you can use the other panel for moving large items.

Is a push pad a good choice for my narrow storefront entrance instead of a long bar?

It may be, provided the pad style fits your entrance and gives people a usable pushing surface. A pad has a broad section you press, while a crossbar is a horizontal rail you push. The space available on the moving panel and the way people approach the opening can influence which style is practical.

Talk to a locksmith

We take calls Sunday to Thursday from 7 AM to 10 PM and Friday from 7 AM to 4 PM.

Call (484) 488-7719
(484) 488-7719