Commercial locksmith · Abington, PA

Panic Bar Installation in Abington, PA

We bring panic bar installation to business doors across Abington. Call and we tell you honestly when we can be there.

  • 3 years in business
  • Open 6 days a week
  • Cars, homes and businesses
Push bar exit device on a commercial rear door

How panic bar installation works in Abington

A worn exit device can make an Abington business door hard to open with a push or unreliable when someone needs to leave.

We replace worn hardware with a panic bar suited to the opening, allowing people to push their way out while the outside stays locked. If you also need entry from outside, you can choose a keyed handle. A setup without an outside handle keeps entry limited to another entrance.

A pair of doors needs an arrangement that takes both sides into account. We look at how they close and where you need keyed access, then select equipment suited to that setup. If the exit sticks or drags, new push hardware alone may not solve the problem. We identify what is interfering with movement and explain the options for your Abington business, including whether the opening needs other work before the new device can operate properly.

Before we head your way

When you call, we ask whether the opening has one door or a pair, what each is made of, and which way it swings.

Those details help us identify hardware that fits the opening. Have the width of each door ready if you can measure it, and tell us whether there is already a panic bar or another latch in place. Mention any sticking or dragging, since the opening needs to move and close properly for an exit device to work.

Do you need a keyed handle on the exterior, or should that side have no handle? We will ask because that choice affects how people get back in while the opening stays secured from outside. Tell us whether you have an existing lock and key you want to keep, since compatibility affects your options. If possible, have photos ready showing both sides, the edge where it latches, and any existing hardware. These show us details you may not know how to describe.

Once we reach the business door

We start by looking at how your pair of doors meets, swings and latches, and whether either side sticks or drags.

If you need both sides to open together, we check how they interact rather than assuming one push will release both. Before installation, we explain the choices that fit the opening. Each side may need its own exit device, and the arrangement determines how the pair opens. You can also choose an outside handle operated by a key, or keep the exterior locked without a handle.

Once you have chosen the arrangement, we install the hardware and check its operation with you. We push from inside to see how each side releases and whether the pair opens as intended. We also test the outside access you selected and make sure the latches engage when the doors close. If sticking or dragging interferes with operation, we point out what we found and explain whether it needs to be addressed separately.

  1. You callWhich doors, who uses them.
  2. A few questionsHours and who holds keys.
  3. The plan, firstHardware and keys explained.
  4. Tested with youEach door we worked on.

Local to Abington

If your business exit door near Rydal sticks when you push it, avoid forcing it and use another usable exit.

The resistance may come from the door dragging, not from the device you push. A panic bar is intended to release the door from inside, but installing one alone may not correct a door that catches.

For a door in Abington that also serves as an entrance, consider how you want to get back in from outside. An outside handle with a key can keep entry controlled while allowing the door to open with a push from inside. Tell us if you need that arrangement when you describe the sticking door. The outside hardware needs to work with the exit device you choose.

Looking after it

With someone on the inside and the key in hand, check that the door stays locked from outside and opens with a push from inside.

If you have an outside handle, check that the key operates it as intended. Keep the exit clear of boxes, mats and other objects, and never block the panic bar. These checks can reveal a change in operation without leaving you locked out.

Watch for sticking, dragging, a loose push surface or a latch that does not catch. Avoid forcing the hardware or applying oil to it, since either may make the problem harder to diagnose. If the exit does not open freely from inside, use another available exit and arrange service. Call us if it no longer stays secured from outside, the key is difficult to turn or any part has shifted. We can inspect the hardware and determine what needs adjustment or repair.

Panic Bar Installation questions from Abington

Can I keep my business locked from outside but still use a key to get in?

Yes, a keyed outside handle can allow entry while the inside remains openable with a push. Outside access and the exit function work separately, so securing the entrance from outside does not have to prevent someone from leaving. Some designs also let you leave the outside access unlocked when you want people to enter freely.

If my entrance has double doors, does each side need its own panic bar?

It may take a separate device on each side, or one side may be secured while the other serves as the active exit. The choice affects which side opens when pushed and how the two sides meet when closed. The width you need for passage and how you use the entrance matter when choosing an arrangement.

Will an exit device fit my glass door with a narrow metal border?

It may fit, but the usable mounting space limits which models are suitable. Some are made for narrow metal borders, while others need a wider surface for secure mounting. The glass itself is not a substitute for that mounting space. If there is too little room, a different device design may be needed.

Ready when you are

Office visits in West Chester are by appointment only; the work happens at your door or your car.

Call (484) 488-7719
(484) 488-7719