Commercial locksmith · Upper Dublin, PA

Panic Bar Installation in Upper Dublin, PA

Mobile panic bar installation for storefronts and offices around Upper Dublin. When you call, we tell you plainly when we can come.

  • 3 years in business
  • Open 6 days a week
  • Cars, homes and businesses
Push bar exit device on a commercial rear door

What panic bar installation involves

A rear door used for deliveries in Upper Dublin serves two purposes: it admits supplies and provides a way out.

A panic bar gives people inside a push surface to open the door. The outside can remain locked, and a keyed exterior handle can give authorized people a way in. We install exit devices for businesses that need those functions on the same opening.

A pair of doors needs a setup that accounts for how each side opens. We can install a device on one or both sides, based on the opening and its use. If an exit sticks or drags, adding a bar alone may not solve the problem. The cause could be existing hardware or a condition that needs a separate repair. Do not force a sticking exit or assume it will open freely. For businesses in Upper Dublin, we consider the condition of the opening as well as the choice of device.

Before we head your way

When you call, we'll ask whether the opening has one door or a pair, which way each leaf swings, and whether the material is wood, metal, or glass.

Those details help us understand what kind of exit device the opening may take and whether each leaf needs its own hardware. Have a clear photo of the inside and outside ready, along with the approximate width of each leaf. If something is already installed, a photo gives us a starting point for identifying what may need to be replaced.

Tell us whether you want the outside to stay locked and whether you need a handle that works with a key. That choice affects how people enter while keeping the inside set up for a push to exit. We'll also ask if the door sticks, drags, or is hard to close, since those conditions may affect how the new hardware works. Mention any existing lock you want to keep or replace, so we can consider compatibility.

Step by step at the business door

We start by looking at both sides of the opening, including how they meet and whether either side sticks or drags.

For a pair that needs to open together, we look at how each side is held closed and how the existing setup releases. We explain whether separate push devices or a coordinated arrangement would suit the opening, and what each choice means for using it.

Before starting, we go over the proposed placement and the options for entry from outside. You may want the outside kept locked, or a keyed handle that lets you unlock it for entry while people inside can still push to exit. After installation, we check the operation with you, pushing each side, watching how they close, and trying the outside key if one was included. If the opening still drags or does not close as it should, we point that out and explain what needs attention beyond the installation.

  1. You callWhich doors, who uses them.
  2. A few questionsHours and who holds keys.
  3. The plan, firstHardware and keys explained.
  4. Tested with youEach door we worked on.

Close to home in Upper Dublin

At a business near Maple Glen, a worn exit device may have you pressing harder than you should to get out.

If the door also drags across the floor, that resistance is a separate clue, and replacing the device alone may not resolve it. Avoid forcing a stubborn door, since that can put more strain on the hardware.

For an installation in Upper Dublin, think about how you want people to enter from outside. A handle with a key gives you a way to secure that side while allowing authorized entry. With the right hardware, pressing from inside releases the exit independently of the outside handle's locked setting. The replacement needs to suit both the door and the way you want to control entry.

What to watch for afterward

Keep the area around the exit clear, and avoid propping the door open or taping the latch back.

Wipe the panic bar with a soft cloth rather than spraying cleaner into it. Before testing the outside handle, keep your key with you so you can get back in. From inside, a push should release the door without a key.

Watch for sticking, dragging, or a latch that does not catch when the door closes. A handle that turns when it should remain locked is another reason to call us. If you have to shove or lift the door to get it open, avoid forcing it or trying to adjust the hardware yourself. We can look at what is interfering with its operation and explain the options for addressing it.

Common questions about panic bar installation

Can my Upper Dublin shop stay locked outside while customers exit with a push?

Yes, an exit device can allow people to push out while the outside stays locked. An outside handle with a key gives you a way to enter from that side without changing how people leave. Some designs also let you leave the outside handle unlocked when you want customers to enter freely.

For my pair of entrance doors, does each side need its own device?

It depends on how you want the two sides to work. You may choose a device for each leaf, or use one side as the regular exit and keep the other secured. The way the leaves meet and latch affects the available choices, so a pair needs a coordinated setup.

Can I keep the latch released while my store is open to customers?

Yes, some exit devices have a setting that holds the latch back. This lets people enter without using a key, but it also means the opening is not secured from outside. The setting does not prop the door open. Whether you can use this feature depends on the door and the device fitted to it.

Talk to a locksmith

Office visits in West Chester are by appointment only; the work happens at your door or your car.

Call (484) 488-7719
(484) 488-7719