Commercial locksmith · Hockessin, DE

Panic Bar Installation in Hockessin, DE

We bring panic bar installation to business doors across Hockessin. One call gets you a plain answer about when we can be there.

  • 3 years in business
  • Open 6 days a week
  • Cars, homes and businesses
Push bar exit device on a commercial rear door

Panic Bar Installation for Hockessin businesses

A business door may need to stay locked from outside while opening with a push from inside.

In Hockessin, we install panic bars and other exit devices that give you that combination. The outside can remain locked while a push on the bar releases the door. If you want access from both sides, an outside handle with a key gives you a way to unlock it from outside without changing how people exit. We fit the setup to the door and the way you need it to operate.

A pair of doors calls for a different arrangement from a single door. The two sides meet in the middle, and each one used for exit needs a way to open as intended. We consider how you use the opening when choosing the arrangement. A Hockessin exit that sticks or drags presents another problem: resistance from the door can interfere with opening it by pushing. We explain what needs attention so you can decide how to address the opening.

What we ask when you call

When you call, we ask whether you have a single door or a pair, which way each door swings, and what the door is made of.

Those details affect where an exit device can fit and how the doors work together. Tell us if either door sticks or drags, and where it catches. A door that does not move freely can interfere with an exit device. If you have the door width and thickness, keep those measurements handy.

We also ask what hardware is on the door now and whether you want to keep it. Describe how you want the door to open with a push from inside and whether it should stay locked from outside. If you need an outside handle operated by a key, mention that too, since it affects the hardware selection. Photos of both sides of the door and the existing lock give us a clearer view of the available space and the parts already in place.

Step by step at the business door

We start by looking at the door, its swing and the space where the panic bar would sit.

If the entrance sticks or drags, we check how that affects closing and latching, since the opening needs to shut properly to stay secure. For a pair of doors, we look at how the two leaves meet and which one you use to enter. We explain what we find and whether the entrance needs separate repair before installation.

To keep the entrance locked from outside while allowing people to leave with a push, you may choose a keyed outside handle or no outside handle, with entry through another entrance. We explain how each choice affects access and what happens when the door closes. After installation, we test the push action from inside and check that it latches. We also check the outside entry arrangement with you, so you can see how the key works or confirm that the exterior stays locked. If anything catches or fails to close, we point it out and explain the next step.

  1. You callWhich doors, who uses them.
  2. A few questionsHours and who holds keys.
  3. The plan, firstHardware and keys explained.
  4. Tested with youEach door we worked on.

Panic Bar Installation near you in Hockessin

At a business on Limestone Road in Hockessin, you may have a pair of exit doors that need to open together for a wide passage.

Each door can have its own push bar, but pushing one does not automatically open the other. Consider whether people need to open both sides with one action or whether each side can be pushed open separately. That choice affects the hardware the doors need.

You can keep the doors locked from outside while allowing people to push them open from inside. If you need a way back in, an outside handle with a key can be fitted to one door. The other door can remain secured from outside and still open from inside. Think about which side makes the most practical entrance before choosing where the keyed handle goes.

After the job

Keep delivery boxes, pallets and carts clear of the rear door, both inside and outside.

Make sure deliveries do not block the path out or prevent the door from closing. Check the push bar periodically by opening the door from inside, then let it close and confirm that it latches. Before testing a keyed outside handle, make sure you have another way back inside.

Changes in the way the door moves or sounds are worth noticing. If it starts to drag, sticks, fails to latch or needs extra force to open, call us to check the problem. Do not force the door or try to adjust the hardware yourself, since an adjustment made in the wrong place could make the exit harder to use.

Questions people in Hockessin ask

Can my employees leave through the back door while I keep the outside locked?

Yes, the outside can stay locked while people inside open the exit with a push. An outside handle with a key gives you a way to enter from outside without changing how people exit. The model you choose determines whether the key releases the handle for one entry or also lets you leave it unlocked.

If my shop has a pair of exit doors, does each side need its own device?

No, a pair may have one active side or a device on each side. With one active side, the other may stay secured and need a separate release before it can open. A push surface on both gives people a way out through either side and makes the full opening available without an extra release.

Will a panic bar on my rear exit sound an alarm when someone pushes it?

No, a basic mechanical model opens the exit without sounding an alarm. An alarmed version may include a built in sounder, but that is a separate feature, not something every model has. A sound at the opening alerts people nearby; it does not by itself send a message to anyone elsewhere.

One call to start

We take calls Sunday to Thursday from 7 AM to 10 PM and Friday from 7 AM to 4 PM.

Call (484) 488-7719
(484) 488-7719